Accessories
The Phenom-World instruments are built to fulfill your imaging needs. We offer a wide range of sample holders and sample preparation tools to enhance your instrument's performance and capabilities, making your investment more flexible, extensible, and customizable.
Sample Holder
This standard pin stub sample holder is designed for high resolution (30 nm) imaging and can accommodate 3D type samples.
- Sample size upto 25mm diameter and 30mm height
Key specifications
Charge Reduction Sample Holder
The charge reduction sample holder is designed to avoid extra sample preparation on non conductive samples. With the charge reduction holder samples like paper, polymers, organic materials, ceramics, glass, coatings can be imaged in their original state.
Specification Sheet Charge Reduction Sample Holder
- Up to 8 times higher magnification before charging is visible compared to the standard Phenom sample holder.
- The need for sputter coating is reduced dramatically resulting in no additional equipment required and faster sample preparation.
- Non conductive samples can be imaged in their natural state providing valuable back scatter material contrast information.
Key specifications
Metallurgical Charge Reduction Sample Holder
The charge reduction sample holder is designed to avoid extra sample preparation on non conductive samples. With the charge reduction holder samples like paper, polymers, organic materials, ceramics, glass, coatings can be imaged in their original state.
Specification Sheet Charge Reduction Sample Holder
- Up to 8 times higher magnification before charging is visible compared to the standard Phenom sample holder.
- The need for sputter coating is reduced dramatically resulting in no additional equipment required and faster sample preparation.
- Non conductive samples can be imaged in their natural state providing valuable back scatter material contrast information.
Key specifications
Metallurgical Sample Holder
This (optional) holder supports resin mounted samples (schlieffen). Embedding and polishing are common techniques used to create flat samples for microscopic investigation.
- Sample size upto 32mm diameter and 30mm height
Key specifications
Micro Tool Holder
This (optional) holder makes it possible to image a wide range of axial shaped objects such as drilling bits and milling tools. The holder has been specially designed for the micro manufacturing market, where the Phenom is used as a quality inspection tool in order to meet and maintain the high quality standards in this type of industry.
Specification Sheet Micro Tool Sample Holder
- Easy and fast clamping
- Tilting and rotation allow for easy sample positioning
- No extra tooling required for sample loading
- No sample modification needed
Key specifications
Micro-electronics Insert
Traditionally samples are prepared by gluing them onto an aluminum stub, removing the sample after imaging causes damage.
The micro-electronics insert is designed to overcome this problem. Its unique clamping mechanism makes glue, or other adhesives, obsolete.
Specification Sheet Inserts
- No scratching or contaminating the sample
- Instant preparation and loading
Key specifications
X-view Insert
The x-view insert is designed to look at cross sections of samples. It uses a smart split clamping mechanism that eliminates the need for screws and tools to clamp the sample. A wide range of sample can be clamped from thin pieces of coating or paint to fractured surfaces of screws or other parts.
Specification Sheet Inserts
- Easy clamping without the need for screws or extra tools
